directly to stain.
Agitate lightly with brush to
cover all affected fibers, down to backing and stand up fibers.
2. Blot affected area with a wet, WHITE cotton towel and extract
using hot water.
(Repeat steps 1 & 2 if necessary)
Use a wet, WHITE cotton towel and a steam iron on low or delicate
Apply Red Erase to affected area.
Wet towel with water and lay over
Place iron on towel for up to 30 seconds.
Lift towel to see if stain is
removed. Repeat if needed.
* note* Keep towel wet during process
Red Erases unique formula continues to work after you're gone.
If a slight stain persists, it
should vanish over night.
Towel may turn a yellowish color,
this is normal.
Red Erase does not bleach carpet
or alter color.
It chemically bonds with stain to
allow for release from fibers.